Our Equipment

The workhouse of the HSA market, the CME-55 has capabilities that get the job done in an efficient and cost effective manner. The hydraulic feed and retract system provides 28,275 lbs. [12,826 kg] of retract force and 18,650 lbs. [8,460 kg] of down pressure. The 72 inch [183 cm] stroke, hydraulic vertical drive system has no chains or cables which can stretch. It gives you precise control of force on the drilling tools. From 2.25” HSA to 10.25” HSA, the CME can get the job done. Both of our CME-55 rigs have 140# automatic drop hammers for SPT. Visit the CME site for more detailed information.

Wider tracks and a heavy-duty undercarriage provide the foundation for the Model 6620DT's robust design. The stronger, wider undercarriage allows this direct push machine to be used on concrete or pavement, and enables the machine to readily negotiate in tight, confining work areas and on off-road, rugged terrain. The machine has 12-inch tracks compared to 9.25-inch tracks on the 6610. The overall width of the machine has increased from 48 to 60 inches providing a more stable base for both probing and drilling operations. Visit the Geoprobe website for more information.

The compact size of the Model 6610DT direct push machine gets you in to confined spaces (12.5’ overhead operating clearance required) to get the work done. Since the weight of the unit is evenly distributed over both tracks, the Model 6610DT can easily maneuver through shallow water, soft sands, or muddy fields while static weight is more than enough to get to required depth.

For more detailed information, visit the Geoprobe website.

The compact size of the 66DT gets you in to confined spaces to get the work done. Because the weight of the unit is evenly distributed over both tracks, the 66DT can easily maneuver through shallow water, soft sands, or muddy fields. But its convenient structure doesn't sacrifice strength...the 66DT provides 42,000 pounds of pull.

For more detailed information, visit the Geoprobe website.

In response to numerous requests from our valued customers, we have added the GH42 portable unit to our fleet of Geoprobe rigs. On occasion, sampling is required at indoor boring locations to properly investigate subsurface contamination within the footprint of a building. With this portable unit we have the ability to maneuver through small spaces, operate without generating harmful fumes, and operate within the confines of low ceilings. One of the greatest benefits of this unit is the combination of small size and powerful downhole rod advancement.